Where To Buy Deutsch Connectors
DOWNLOAD - https://urllio.com/2tKzmd
TE Connectivity / DEUTSCH DT Family of connectors are environmentally-sealed connectors designed for cable to cable applications on the engine or transmission, under the hood, on the chassis, or in the cab. On signal level circuits in harsh environmental conditions where small connection degradation may be critical, the DT Series general purpose connectors provide reliability and performance at a low cost.
TE Connectivity / DEUTSCH DT Series of environmentally-sealed connectors are designed specifically for harsh environment cable to cable applications. Thermoplastic housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture.The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. The DEUTSCH DT Series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab.
TE Connectivity / DEUTSCH DTM Series Connectors feature a miniature contact with an enhanced design based on the world class, field-proven DEUTSCH "DT" Series. The DTM is designed for use in harsh environmental applications where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission, and under the hood. TE Connectivity / DEUTSCH DTM Series connectors provide peak connector performance everywhere data signals or critical electronic circuits are needed.
TE's DTP Series connectors are the answer to all of your most demanding power application requirements. DTP Series connectors offer the proven reliability and quality of TE's DT Series, combined with the added flexibility of using power contacts.
The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
The DEUTSCH DTHD Series Power Plugs are single terminal connectors developed for applications requiring a complete, environmentally sealed, single power circuit termination. The plug features an integral coupling latch that provides tactile and audible feedback during coupling.The rugged thermoplastic receptacle is designed as an inline for cable-to-cable applications and is supplied with an integral Vee-Groove to accept mounting clips, brackets and flanges. Crimp-type solid contact sizes 4, 8 and 12 accept wire sizes AWG 6, AWG 8, AWG 10, AWG12 and 14 respectively.
TE Connectivity / DEUTSCH J1939/11 compliant DT Series connectors are rugged field proven DT 3-pin connectors designed to meet the SAE requirements for 3-wire CAN applications linking ECUs for serial data communications. The DT 3 way connectors accommodate the CAN_HI, CAN_LO, and shield wires with a variety of options, including:
TE Connectivity / DEUTSCH offers several contacts that can be used interchangeably across most DEUTSCH connector product lines. This commonality improves performance, reliability, and maintainability by reducing changes in the assembly of the wire harness. The use of the same contact system helps eliminate many of the failures reported in harnesses where hundreds of different terminations are used.
TE Connectivity / DEUTSCH DT Family Accessory / Tooling items are available to complement the DT Family of connectors including boots, backshells, gaskets, dust caps, and mounting clips. Accessory items cover a wide array of design requirements such as assisting with moutning, providing additional protection, and offering enhanced aesthetics.
The components are molded from flame retardant and impact resistant materials, and the silicone gaskets and precision construction produce a weather resistant seal that will last for years. Whether you're looking for the DT, DTM, DTP, or any of the other products from Deutsch, we can help, visit Wirecare.com Featured Connectors & the Assembler The Deutsch Connector Assembler makes selecting your full Deutsch assembly incredibly easy! Simply select the plug or receptacle you need and the assembler does the rest! With your choice of plug or receptacle, the assembler will choose corrisponding parts with the same key, compatable modifications, and compatable pins, sockets, wedgelocks, and accessories. With part selection this easy, even a first time user or a purchasing agent who may not know how these parts work, is able to choose the proper options and be confident that all of the seperate pieces will fit together correctly and work perfectly. Click Here to View the Assembler DT SeriesDeutsch DT series connectors provide superior electrical properties and weather resistance in a user friendly product. The DT connector system is the choice for many top NASCAR, IRL, Grand American Road Racing Association Racing Teams, and by leading equipment manufactures due to its reliability and common terminal/crimper system.
Deutsch DTM Series of connectors feature a miniature contact with an enhanced design based on the field-proven Deutsch "DT" Series. Applications include on or around the engine, the transmission and under the hood. Everywhere data signals or critical electronic circuits go, the field proven design will provide reliable connector performance.
The answer to all of your most demanding power application requirements. DTP Series connectors offer the proven reliability and quality of Deutsch's DT Series, combined with the added flexibility of using power contacts. They are environmentally sealed and come in two and four pin arrangements.
The Deutsch HD10 series was designed for applications where the need for a Heavy Duty Industrial Connection is required. These rugged and completely sealed connectors are perfect for trucks and buses, heavy equipment, off-road, marine and recreational vehicles as well as plant equipment and robotics.
The first range of high performance connectors designed for the Autosport Industry. Unlike your standard military design, these connectors are light weight and offer space saving solutions in a wide variety of options. The AS Series connector comes in 4 shell styles & 5 keyway orientations.
The AS Microlite HE (ASL) Series was created for applications where even smaller and lighter connectors are needed. The ASL line is more than 30% lighter the traditional AS Micro HE line and almost 8mm shorter yet is fully intermateable with the AS Micro HE Series. Using Deutsch #23 contacts, this connector still retains all of the critical features of the traditional lines.
Deutsch Quick Connect Series compact connectors feature 3 contact arrangements (2,7 and 12) with wire gauges 16 to 26 AWG and contact sizes 16, 20 and 22. These environmentally sealed, small size connectors meet the needs for many engineering design requirements.
The Deutsch DRC Series Connector is a rectangular connector that offers insert arrangements of 24,40,50,60,64,70,76, and 80 cavities. These connectors accept size 12,16 and 20 contacts and are available in In-line, Flange Mount and PCB mounting options.
The DTV Series, much like the Genuine Deutsch DT Series connectors, also provides superior electrical properties and weather resistance in an attractive, economical and user friendly product but adds the flexibility of an 18 cavity flanged design.
Deutsch DRB series connectors are high density pin count rectangular connectors engineered for environments where moisture, dirt and rough terrain can contaminate or damage electrical connections. The high performance thermoplastic body utilizes a bulkhead mounted flange to create a tight environmental seal. Shock, vibration and high-temp resistant, the DRB series connectors are ideally suited for firewall mounted pass-through applications.
The solid contact series is designed for us with larger wire sizes in heavy duty applications. The stamped and formed contacts are for use where wire termination costs are of primary concern without sacrificing the reliabtility. Wedgelocks position the contacts and ensure continued precise alignment.
These kits contain all items necessary to complete both ends of a contact assembly using genuine deutsch DT connectors. Each includes the required receptacle and plug, with pins, sockets, and wedgelocks for each.
For more than 70 years, TE's DEUTSCH connectors have reliably performed in some of the harshest environments. For aerospace, defense, marine, industrial commercial transportation, and rail, our DEUTSCH product line includes wires, connectors, contacts, accessories, and subsea power cables. Today, DEUTSCH is part of the family brands of TE and expands the product portfolio in military specs, such as the MIL-DTL-38999 DEUTSCH connector series. DEUTSCH connectors are also leaders in autosport and motorsport applications.
From the road to the farm field and to the worksite, the electrical systems of your vehicles and equipment must stand up to rigorous conditions and all-weather environments in heavy industries. Failure in an electrical system can be expensive to diagnose and down equipment can stop entire operations. We have designed a wide connectors portfolio able to withstand high heat, moisture, chemicals, impact, and vibration levels. Discover it now.
Sample items are not available on this country site. To order samples, please see the Samples FAQ\'s for what country sites offer samples.\n', samplesItemsMessage:'', paidItemsMessage:'' }; teV2.ns('localization').productCompliance = { G : 'Converted to EU RoHS but not ELV Compliant', 'G-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) but NOT with the End of Life Vehicles Directive 2000\/53\/EC (ELV). These products utilize exemptions in the RoHS2 Directive that are not allowed in the ELV Directive. Finished electrical and electronic products will be CE marked as required by Directive 2011\/65\/EU (RoHS2). Components may not be CE marked. \n',L : 'Not EU RoHS or ELV Compliant', 'L-desc' : 'These products do NOT comply with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and the End of Life Vehicles Directive 2000\/53\/EC (ELV). This means that these products contain lead or other materials that are restricted in these Directives. Consequently, they should NOT be used in any application requiring RoHS2 or ELV compliance. \n',5 : '5 of 6 EU RoHS\/ELV Compliant', '5-desc' : 'These products comply with the End of Life Vehicles Directive 2000\/53\/EC (ELV) but due to lead in the solderable interface do NOT comply with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). However, these products may be suitable for use in applications where there is a RoHS2 product based exemption for lead in solders, such as the server, storage, or network infrastructure exemption. \n',A : 'Converted to ELV Compliant', 'A-desc' : 'These products comply with the End of Life Vehicles Directive 2000\/53\/EC (ELV). The ELV Directive requires that certain automotive products be free (except for trace impurities) of mercury, cadmium and lead. Lead can still be used as an alloying additive in copper, steel and aluminum and in solderable applications. \n',E : 'Always ELV Compliant', 'E-desc' : 'These products comply with the End of Life Vehicles Directive 2000\/53\/EC (ELV). The ELV Directive requires that certain automotive products be free (except for trace impurities) of mercury, cadmium and lead. Lead can still be used as an alloying additive in copper, steel and aluminum and in solderable applications. \n',V : 'Always EU RoHS compliant but not ELV Compliant', 'V-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) but NOT with the End of Life Vehicles Directive 2000\/53\/EC (ELV). These products utilize exemptions in the RoHS2 Directive that are not allowed in the ELV Directive. Finished electrical and electronic products will be CE marked as required by Directive 2011\/65\/EU (RoHS2). Components may not be CE marked. \n',R : 'Always EU RoHS\/ELV Compliant', 'R-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). These products also comply with the End of Life Vehicles Directive 2000\/53\/EC (ELV). The RoHS2 Directive requires certain electrical and electronic products be free (except for trace impurities) of mercury, cadmium, hexavalent chromium, PBB, PBDE and lead. Certain exemptions are allowed such as lead used as an alloying additive in copper, steel and aluminum. Finished electrical and electronic products will be CE marked as required by Directive 2011\/65\/EU (RoHS2). Components may not be CE marked. \n',Y : 'Converted to EU RoHS\/ELV Compliant', 'Y-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). These products also comply with the End of Life Vehicles Directive 2000\/53\/EC (ELV). The RoHS2 Directive requires certain electrical and electronic products be free (except for trace impurities) of mercury, cadmium, hexavalent chromium, PBB, PBDE and lead. Certain exemptions are allowed such as lead used as an alloying additive in copper, steel and aluminum. Finished electrical and electronic products will be CE marked as required by Directive 2011\/65\/EU (RoHS2). Components may not be CE marked. \n',S : 'Not in Scope for ELV Compliance', 'S-desc' : 'These are products that TE Connectivity (TE) considers to be out of scope for the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and\/or the End of Life Vehicles Directive 2000\/53\/EC (ELV). These typically would be products that are not electrical or electronic in nature nor would be used in electrical\/electronic equipment covered by these Directives. Customers should verify this assessment prior to use. \n',T : 'Not in Scope for EU RoHS Compliance', 'T-desc' : 'These are products that TE Connectivity (TE) considers to be out of scope for the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and\/or the End of Life Vehicles Directive 2000\/53\/EC (ELV). These typically would be products that are not electrical or electronic in nature nor would be used in electrical\/electronic equipment covered by these Directives. Customers should verify this assessment prior to use. \n',U : 'Not in Scope for EU RoHS\/ELV Compliance', 'U-desc' : 'These are products that TE Connectivity (TE) considers to be out of scope for the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and\/or the End of Life Vehicles Directive 2000\/53\/EC (ELV). These typically would be products that are not electrical or electronic in nature nor would be used in electrical\/electronic equipment covered by these Directives. Customers should verify this assessment prior to use. \n',N : 'Not reviewed for RoHS Compliance', 'N-desc' : 'These products have not yet been reviewed for compliance with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and the End of Life Vehicles Directive 2000\/53\/EC (ELV). \n',K : 'Customer Controlled (RoHS Info Unknown)', 'K-desc' : 'These products have not been reviewed for compliance with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2) and the End of Life Vehicles Directive 2000\/53\/EC (ELV). \n' }; teV2.ns('localization').productRoHSCompliance = { C : 'EU RoHS Compliant', 'C-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). The RoHS2 Directive requires that certain electrical and electronic equipment products do not contain mercury, cadmium, hexavalent chromium, PBB, PBDE, lead, DEHP, BBP, DBP and DIBP above defined thresholds. Products indicated as \'Compliant\' do not contain any of these substances above the prohibition thresholds. Finished electrical and electronic equipment products will be CE marked as required by the Directive. Components may not be CE marked.\n',X : 'EU RoHS Compliant with Exemptions', 'X-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). The RoHS2 Directive requires that certain electrical and electronic equipment products do not contain mercury, cadmium, hexavalent chromium, PBB, PBDE, lead, DEHP, BBP, DBP and DIBP above defined thresholds. Products indicated as \'Compliant with Exemptions\' contain one or more of these substances above the prohibition thresholds, but are compliant by claiming one or more valid exemptions. Finished electrical and electronic equipment products will be CE marked as required by the Directive. Components may not be CE marked.\n',L : 'Not EU RoHS Compliant', 'L-desc' : 'These products DO NOT comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). Products indicated as \u2018Not Compliant\u2019 contain one or more restricted substances above the prohibition thresholds. Consequently, these products should NOT be used in any application requiring RoHS2 compliance.\n',U : 'Out of Scope for EU RoHS', 'U-desc' : 'These are products that TE Connectivity considers to be out of scope for the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). Products indicated as \u2018Out of Scope\u2019 typically are not electrical or electronic in nature, nor would be used in electrical\/electronic equipment covered by this Directive. Customers should verify this assessment prior to use.\n',N : 'Not Yet Reviewed for EU RoHS', 'N-desc' : 'These products have not yet been reviewed for compliance with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2).\n' }; teV2.ns('localization').productRoHS10Compliance = { C : 'EU RoHS Compliant', 'C-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). The RoHS2 Directive requires that certain electrical and electronic equipment products do not contain mercury, cadmium, hexavalent chromium, PBB, PBDE, lead, DEHP, BBP, DBP and DIBP above defined thresholds. Products indicated as \'Compliant\' do not contain any of these substances above the prohibition thresholds. Finished electrical and electronic equipment products will be CE marked as required by the Directive. Components may not be CE marked.',X : 'EU RoHS Compliant with Exemptions', 'X-desc' : 'These products comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). The RoHS2 Directive requires that certain electrical and electronic equipment products do not contain mercury, cadmium, hexavalent chromium, PBB, PBDE, lead, DEHP, BBP, DBP and DIBP above defined thresholds. Products indicated as \'Compliant with Exemptions\' contain one or more of these substances above the prohibition thresholds, but are compliant by claiming one or more valid exemptions. Finished electrical and electronic equipment products will be CE marked as required by the Directive. Components may not be CE marked.',L : 'Not EU RoHS Compliant', 'L-desc' : 'These products DO NOT comply with the substance restrictions of the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). Products indicated as \u2018Not Compliant\u2019 contain one or more restricted substances above the prohibition thresholds. Consequently, these products should NOT be used in any application requiring RoHS2 compliance.',U : 'Out of Scope for EU RoHS', 'U-desc' : 'These are products that TE Connectivity considers to be out of scope for the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2). Products indicated as \u2018Out of Scope\u2019 typically are not electrical or electronic in nature, nor would be used in electrical\/electronic equipment covered by this Directive. Customers should verify this assessment prior to use.',N : 'Not Yet Reviewed for EU RoHS', 'N-desc' : 'These products have not yet been reviewed for compliance with the Restriction on Hazardous Substances Directive 2011\/65\/EU (RoHS2).' }; teV2.ns('localization').productElvCompliance = { C : 'EU ELV Compliant', 'C-desc' : 'These products comply with the substance restrictions of the End of Life Vehicles Directive 2000\/53\/EC (ELV). The ELV Directive requires that materials and components of vehicles do not contain mercury, cadmium, hexavalent chromium, and lead above defined thresholds. Products indicated as \u2018Compliant\u2019 do not contain any of these substances above the prohibition thresholds.\n',X : 'EU ELV Compliant with Exemptions', 'X-desc' : 'These products comply with the substance restrictions of the End of Life Vehicles Directive 2000\/53\/EC (ELV). The ELV Directive requires that materials and components of vehicles do not contain mercury, cadmium, hexavalent chromium, and lead above defined thresholds. Products indicated as \u2018Compliant with Exemptions\u2019 contain one or more of these substances above the prohibition thresholds, but are compliant by claiming one or more valid exemptions.\n',L : 'Not EU ELV Compliant', 'L-desc' : 'These products DO NOT comply with the substance restrictions of the End of Life Vehicles Directive 2000\/53\/EC (ELV). Products indicated as \u2018Not Compliant\u2019 contain one or more restricted substances above the prohibition thresholds. Consequently, these products should NOT be used in any application requiring ELV compliance.\n',U : 'Out of Scope for EU ELV', 'U-desc' : 'These are products that TE Connectivity considers to be out of scope for the End of Life Vehicles Directive 2000\/53\/EC (ELV). Products indicated as \u2018Out of Scope\u2019 typically are not materials or components of vehicles. Customers should verify this assessment prior to use.\n',N : 'Not Yet Reviewed for EU ELV', 'N-desc' : 'These products have not yet been reviewed for compliance with the End of Life Vehicles Directive 2000\/53\/EC (ELV).\n' }; teV2.ns('localization').productPartStatus = { 'preliminary' : 'Preliminary', 'preliminary-desc' : 'Has recently been introduced. Please verify availability of these products by contacting the Support Center. \n', 'active' : 'Active', 'active-desc' : 'Currently a standard inventory or built to order item at a TE Connectivity (TE) site or sites globally. Some ACTIVE products may only be readily available for a region or locale. These active products may become inactive at the sole discretion of TE, as stated in TE Connectivity Corporations\' Terms and Conditions. \n', 'nrd' : 'Do Not Use for New Design', 'nrd-desc' : 'A part that is generally not recommended for new designs because it is nearing or in the decline, end of life, and\/or aftermarket phase of its product life cycle.\n', 'obsolete' : 'Obsolete', 'obsolete-desc' : 'No longer available or recommended for use. It does not have an exact replacement. If a replacement option is provided, refer to the replacement product drawing to validate use in your application. \n', 'superseded' : 'Superseded', 'superseded-desc' : 'No longer available or recommended for use. It does not have an exact replacement. If a replacement option is provided, refer to the replacement product drawing to validate use in your application. \n', 'restricted' : 'Restricted', 'restricted-desc' : 'Designed for and only available to a specific customer or is controlled for export. Detailed product features cannot be provided. For more information, please contact your sales engineer or the Support Center. \n', 'pending-discontinuance' : 'Pending Obsolescence', 'pending-discontinuance-desc' : 'Is being phased out of ACTIVE status. \n' }; teV2.ns('urls').complianceUrl = '/commerce/alt/SinglePartSearch.do?dest=res&PN='; teV2.ns('urls').noProductImage = '/content/dam/te-com/no-image-available.jpg'; teV2.ns('urls').defaultDownloadImage = '/content/dam/te-com/default-download.jpg'; teV2.ns('urls').productJsonServiceUrl = '/teccatv2/service/product'; teV2.ns('urls').samples = { productAddSampleCartUrl : '/commerce/sam/addPartToCart.do', productHasSampleRequestUrl : '/commerce/sam/checkAvailability.do', samplesFaqUrl : '/usa-en/utilities/te-digital-resources/how-to-order-samples/list-of-eligible-countries.html' }; teV2.ns('urls').apiServicesHost = ' '; teV2.ns('urls').teccatv2Externalhost = ' '; teV2.ns('urls').similarPartsPLPMuleServiceUrl = '/api/v1/recommendations/products/{0}/similar_products'; teV2.ns('urls').b2bPricingInventoryServiceUrl = '/api/v1/exp-tecom-commerce-api/b2b/price-inventory/products?tcpn={0}'; teV2.ns('urls').httpsExternalhost = ' '; teV2.ns('localization').partsList = { myList : 'My List', myLists : 'My Lists', saveToList : 'Save to List', savedToList : '', chooseList : '', removeFomList : '', removedFromList : '', viewList: 'View List', viewLists : 'View Lists', continueBrowsing: 'Continue Browsing', temporaryList: 'Temporary List', success : 'Your product was successfully saved.', alreadyInList : 'This product is already on this list.', error : 'The save to list service is experiencing an error. Please try again later.', saveAllToList : 'Save All to List', newList : 'New List', listLabel : 'list' }; teV2.ns('urls').partsList = { getPartListNames : '/commerce/mpl/getPartListNames.do', addPart : '/commerce/mpl/addPart.do', managePartsList : '/commerce/mpl/managePartLists.do' }; teV2.ns('localization').merchandisingCarousel = { viewProductsLabel : 'View Products', inStockLabel : 'In-Stock', outOfStockLabel : 'Non-Stocked', specialOrderLabel : 'Special Order 781b155fdc
John looked at custom sexdolls and smiled, and Beck looked at him the same way.